14 ENGLISH
Using dust cup set
Optional accessory
Fit the dust cup set against the ceiling when operating
the tool.
►
Fig.35
NOTICE:
Do not use the dust cup set when drill-
ing in metal or similar. It may damage the dust
cup set due to the heat produced by small metal
dust or similar.
NOTICE:
Do not install or remove the dust cup
set with the drill bit installed in the tool. It may
damage the dust cup set and cause dust leak.
MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off and unplugged before attempting to
perform inspection or maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Replacing filter of dust case
1.
Remove the dust case while pressing down the
lever of the dust case.
►
Fig.36:
1.
Lever
2.
Insert the flat-blade screwdriver into the slots of
the filter cover to remove the filter case and filter.
►
Fig.37:
1.
Flat-blade screwdriver
2.
Filter case
3.
Remove the filter from the filter case.
►
Fig.38:
1.
Filter
2.
Filter case
4.
Attach a new filter to the filter case, and then
attach them to the dust case aligning the protrusion on
the filter case with the groove on the dust case.
►
Fig.39:
1.
Protrusion
2.
Groove
5.
Close the cover of the dust case, and then attach
it to the tool.
Replacing sealing cap
If the sealing cap is worn out, the performance of the
dust collection decreases. Replace it if it's worn out.
Remove the sealing cap, and then attach a new one
with its protrusion facing upward.
►
Fig.40:
1.
Protrusion
2.
Sealing cap
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual.
The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
•
Carbide-tipped drill bits (SDS-Plus carbide-tipped
bits)
•
Core bit
•
Bull point
•
Diamond core bit
•
Cold chisel
•
Scaling chisel
•
Grooving chisel
•
Chuck adapter
•
Keyless drill chuck
•
Bit grease
•
Depth gauge
•
Blow-out bulb
•
Dust cup
•
Dust cup set
•
Safety goggles
•
Plastic carrying case
NOTE:
Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
Summary of Contents for 0088381875554
