9 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
HS003G
Blade diameter
185 mm - 190 mm
Max. Cutting depth
at 0°
66.0 mm - 68.5 mm
at 45° bevel
45.5 mm - 47.5 mm
at 56° bevel
34.0 mm - 35.5 mm
No load speed
6,000 min
-1
Rated voltage
D.C. 36 V - 40 V max
Overall length
with BL4025
316 mm
with BL4040
331 mm
Net weight
4.1 - 4.7 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications and battery cartridge may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL4020 / BL4025 / BL4040* / BL4050F*
* : Recommended battery
Charger
DC40RA / DC40RB / DC40RC
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
Intended use
The tool is intended for performing lengthways and
crossways straight cuts and miter cuts with angles in
wood while in firm contact with the workpiece. With
appropriate Makita genuine saw blades, other materials
can also be sawed.
Noise
The typical A-weighted noise level determined accord
-
ing to EN62841-2-5:
Sound pressure level (L
pA
) : 93 dB(A)
Sound power level (L
WA
) : 104 dB (A)
Uncertainty (K) : 3 dB(A)
NOTE:
The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE:
The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter
-
mined according to EN62841-2-5:
Work mode: cutting wood
Vibration emission (a
h,W
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
Work mode: cutting metal
Vibration emission (a
h,M
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
Summary of Contents for 0088381749152
Page 2: ...Fig 1 Fig 2 Fig 3 Fig 4 Fig 5 Fig 6 2 3 1 Fig 7 2 ...
Page 3: ...1 2 Fig 8 2 1 Fig 9 1 Fig 10 1 Fig 11 1 Fig 12 1 Fig 13 1 2 Fig 14 1 Fig 15 3 ...
Page 6: ...1 Fig 31 Fig 32 1 Fig 33 2 1 3 4 Fig 34 1 2 3 Fig 35 1 Fig 36 6 ...
Page 7: ...2 1 2 1 Fig 37 Fig 38 1 Fig 39 1 2 Fig 40 1 Fig 41 1 Fig 42 7 ...
