4V2A1563 (E)
8 - 51
5. Manually load a tool holder into the spindle.
6. Select MDI and position Z axis to its 2
nd
reference position.
A. Key-in ’G30 G91 Z0’.
B. Press the [EOB] key.
C. Press the [INSERT] key.
D. Press Cycle [START].
7. Origin (set to zero) the relative coordinate display.
A. Press the [POS] function key.
B. Press the [REL] softkey.
C. Press the [ORIGIN] then [ALL EXEC].
8. Reference the tool magazine, using Maintenance mode.
A. Display the
MAINTENANCE MENU
screen -
B. Press [MODE SELECT] to activate Maintenance mode.
C. Press the [ATC MGZN] softkey.
D. Using the cursor keys, highlight
ZERO RETURN
.
E. Press the [SET] softkey
.
F. Press and hold the ATC Operation Panel [CW] button until the
magazine reaches its reference dog and aligns.
9. Display the
ATC MAINTENANCE
screen:
A. Press the [MENU PAGE] softkey.
B. Press the [ATC] softkey.
10. Open the ATC shutter.
A. Using the cursor keys, highlight
ATC SHUTER OPEN
.
B. Press the [ON] softkey.
11. Activate Stroke Extend mode.
A. Using the cursor keys, highlight
STROKE EXTEND
.
B. Press the [ON] softkey.
12. Select Handle mode and use the MPG to position X axis, close to the
magazine. Do not engage the gripper fingers in this step.
Summary of Contents for V55
