4V2A1563 (E)
8 - 7
8.2.4
ATC Positions
The ATC unit has several different positions that must be properly set, or
defined, to complete an automatic tool change. These positions include:
•
Tool magazine ready position; radial location of pot. Established by the
6
th
axis word of Grid Shift parameter 1850.
•
X tool change position; X position where spindle centerline is in-line
with pot centerline. Established by the X axis word of 2
nd
reference
position parameter 1241. The X position can only be reached when the
Stroke Extend mode is On.
•
Z tool change position; Z position where tool holder is gripped and
released while in the magazine. Established by the Z axis word of 2
nd
reference position parameter 1241.
•
Z tool clear position; Z position where spindle face clears tool holder
retention knob for magazine indexing to next tool. Commanded as a +Z
115mm incremental move, above the Z axis 2
nd
reference position.
•
X tool clear of magazine position; X position where tool holder clears
the magazine for indexing to the next tool. Commanded as a –X
1085mm, machine coordinate position. This X position can only be
reached when the Stroke Extend mode is On.
for procedures to check the tool magazine ready and the X
and Z tool change positions.
8.2.5
ATC Tool Change Program - O9020
Tool Change Program O9020 is a macro program, stored in the CNC
memory during machine setup, and is the primary program executed
when a tool change is commanded. If the machine is equipped with the
ATLM (Automatic Tool Length Measurement) option, its macros and sub
programs were also installed and when O9020 is executed, it calls two of
these macros during tool change operations.
Tool changes are commanded from the part program or MDI by a T code
(Txxxx) and M06, placed in separate blocks.
•
Txxxx represents the PTN (i.e. T9)
•
M06 is set by CNC parameter 6080 to call macro program O9020.
The tool change program is presented in
, for reference and
in the event the program is deleted from the CNC.
Summary of Contents for V55
