MAKINEX GEN-16P-US-208, Operator'S Manual

Page: 14 / 26

Page 14 of 26
OPERATION
BEFORE USE
1. Oil Level Check (New machines will be pre-oiled from MAKINEX)
Check the engine oil level with the engine stopped and in a level
position.
1 Start the engine and let it idle for 1 or 2 minutes. Stop the engine
and wait for 2 or 3 minutes.
2. Remove the oil level dipstick and wipe it clean.
3. Fully insert the oil level dipstick, then remove it to check the oil
level.
4. If the oil level is low, remove the oil filler cap, and fill with the
recommended oil to the upper limit mark on the oil level dipstick.
5. Reinstall the oil level dipstick and oil filler cap.