![MAKINA S7 PRO-PID User Manual Download Page 19](http://html1.mh-extra.com/html/makina/s7-pro-pid/s7-pro-pid_user-manual_3834249019.webp)
Warning: before performing tests and maintenance and replacing parts.
DISCONNECT THE MACHINE FROM THE MAINS.
8.2 Weekly
Backlash the machine every day (without espresso machine detergent), the group and shower plate
must be cleaned every day, ONCE a week use a detergent in the blind filter:
1. Put a half teaspoon of special espresso machine detergent in the blind filter and then insert it
into the brew group.
2. Pull-up the group brew lever and wait about 20 seconds. Put the lever down to its original
position (completely down until it stops).
3. Repeat this operation at least 57 times.
4. Empty the blind filter and repeat the same operation without detergent 5 times (with water
until). Repeat until the water runs clear.
5. Remove blind filter and replace it with the regular filter. Finally prepare one coffee to remove
residual detergent taste.
8.3 Monthly
Please refresh the boiler water once every month by extracting hot water from the hot water wand.
Important
The machine can only be dismantled by an authorized technician.
A calcified machine may only be descaled by your specialized dealer because a partial
disassembly of the boiler and the tubing may be necessary to prevent the system from
being blocked by lime residues. A late descaling can cause substantial damage to the
machine.
Risk of injury
Be careful of the hot water spray while cleaning the brew group.
Important
Never use abrasive or chloric detergents!
Caution!
If you clean the brew group too often with cleaner, it may start squeaking. Do not clean it
too often with cleaner, you will degrease all the moving parts and they will wear out
quickly. It ́s better if you clean the brew group from time to time without detergent.
Page 19