background image

WELCOME, LET’S GET STARTED

4

MANUFACTURER

MakerBot Industries, LLC                                                                                       
One MetroTech Center, 21st Floor
Brooklyn, NY 11201
347.334.6800

מספר אישור אלחוטי של משרד התקשורת הוא 9452327301
אסור להחליף את האנטנה המקורית של המכשיר ולא לעשות בו כל שינוי טכני אחר

This telecommunication equipment conforms to NTC technical requirement.
8.9.2 Connection and use of this communications equipment is permitted by the Nigerian  
Communications Commission

RADIO AND TELEVISION INTERFERENCE 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant 
to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This equipment generates, 
uses and can radiate radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause harmful interference 
to radio or television reception, which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the machine.
• Increase the separation between the equipment.
• Connect the equipment to an outlet on a different circuit.

Any changes or modifications made to this equipment voids your authority to operate this equipment 
under FCC Rules.

WIRELESS SPECIFICATIONS

SAFETY AND COMPLIANCE

Frequency

2.4 GHz

2.412 – 2.472 GHz

802.11 b/g/n

Taoglas, part #

FX831.07.0100C

2.5 dBi in the 2.4

GHz band

Protocol

Antenna Type

Antenna 

Specifications

WLAN RF

Frequency Range

Summary of Contents for Replicator Mini+



































Reviews: