MakerBot Replicator Mini+, User Manual

Page: 15 / 34

START UP
15
THE MAKERBOT MOBILE APP
MakerBot Mobile is a free app that gives you the power to wirelessly setup your MakerBot Replicator Mini+,
monitor prints, and control multiple network-enabled MakerBot 3D printers over the Cloud. MakerBot
Mobile allows you to do the following:
· Setup your MakerBot Replicator Mini+
· Start, pause, and cancel prints
·
Initiate filament changes
· Monitor your prints
· Receive notifications about your prints, such as print completion, any errors that may occur, and more
· Visually monitor your prints via the onboard camera
DOWNLOADING THE MAKERBOT MOBILE APP
For Android devices
1. Open the Google Play store and type in MakerBot.
2. When you find the MakerBot Mobile App, tap Install.
3. After the mobile app is installed, open the app.
4. You will be asked to sign in with your MakerBot account information.
If you do not have a MakerBot account, tap Sign Up and create one.
For IOS devices
1. Go to the App Store on your iOS device and type in MakerBot.
2. When you find the MakerBot Mobile App, tap Install.
3. After the mobile app is installed, open the app.
4. You will be asked to sign in with you MakerBot account information.
If you do not have a MakerBot account, tap
Sign Up
and create one.