background image

Imprint

© 2019 Franzis Verlag GmbH, Richard-Reitzner-Allee 2,  
85540 Haar bei München 

 

www.franzis.de

Author: Burkhard Kainka
Idea/concept: Michael Büge, Burkhard Kainka
Copy editor: Richard Korff Schmising
Art & design cover: 

www.ideehochzwei.de

Layout & composition: Nelli Ferderer 

 

[email protected]

ISBN 978-3-645-15062-2

2019/01

Picture credits

Drawings created with 

http://fritzing.org/

All rights reserved, including the rights for photomechanical reproduction and storage 
of electronic media. The preparation of distribution of copies on paper, on data carriers 
or online, especially as PDF, is only allowed with the explicit permission of the publisher 
and will be prosecuted otherwise.
Most product and company names as well as company logos included in this work are 
generally also registered trademarks and must be treated as such. For product names, 
the publisher generally follows the manufacturer’s spelling.
All projects and experiments presented in this book were developed, reviewed and 
tested with the greatest possible care. However, errors in this book cannot be com-
pletely excluded. The publisher and the author are liable for cases of intention or gross 
negligence, according to the legal provisions.
Moreover, the publisher and the author are also liable in accordance with the product 
liability law in case of damage to life, body or health or in case of culpable violations 
of the contract. The damage claim related to considerable violations of the contract is 
limited to damage typical for the contract unless a case of mandatory liability accord-
ing to the product liability law applies.

This product was made in accordance with the applicable European directives 
and, therefore, carries the CE certificate. The intended use is described in the 

enclosed instructions. You are solely responsible for adherence to applicable regulations 
in case of any other use or modification of the product. Therefore, construct the experi-
ments exactly as it is described in the instructions. The product must only be passed on 
together with the instructions and this notice.

The symbol of the crossed-out rubbish bin indicates that this product must be 
recycled as electronic waste separately from household waste. Your local coun-
cil can provide you with information about the nearest recycling point.

Summary of Contents for 1968203





























Reviews: