Product Introduction
How to install the labels?
Step 1:
When using a new label, pull the
transparent label lead all the way out to the
horizontal line mark.
★Status of indicator
★Charing instruction
GREEN:
fully charged/ printing/
paper feeding/standby/ ready
YELLOW:
charging
RED:
lid open/ labels improperly
installed
1.
Cutting Button
2.
Unlock Button
3.
Indicator
4.
Power On/Off
5.
Printing Line
6.
Cutter
7.
Type-C
3
Tip:
Red indicator means
incorrect labels installation
Pull to the line mark
Transparent
and unprintable
Tip:
This printer can only print on
12mm/16mm label paper. Please use the
official Makeid label, otherwise it might
damage the printer or cause poor printing.
Step 2:
Close the top cover and press the
cutter to cut, then edit and print in the APP.
3
Type-C Input
5V 2A input for charging. The product
does not come with a power adapter, a
standard Type-C charging plug is sufficient.
BATTERY:
7.4V/500mAh,3.7V/1000mAh, 1.5
hours to be fully charged.
Please charge at intervals of 3 months for
long periods of non-use so that the lithium
battery does not wear out naturally over
time.
5
6
7
Tip:
Long press the Power On/Off button to
shut down the printer, or it automatically
shuts down if left for 30 minutes.
( SHARP! Be Careful when Use)
