Makeblock mScara-Laser Version, User Manual, Page: 15 / 19

mScara User Guide-Laser Version
11/ 15
Initial position axle side view, see (e) for the initial position corresponding to the
software.
e
）
. The led graph file is in 135°scope of ring area as much as possible, excess of the
range may cause the drawn graph abnormal. Lead the following test
graph, …mDrawBot Download Package\Examples of Material\Test\Square.svg for
effect test. Select the check box , the laser become lit, set the laser
intensity to 90%-100% and laser burning time to 20-60ms, and cancel the selection.
( If the graph is deformed or not closed, 1. Inspect whether La and Lb are correct.
2. Adjust the tightness of the screw, calibrate levelness and so on. 3. See FAQs for
details)