Makeblock mScara-Laser Version, User Manual, Page: 12 / 19

mScara User Guide-Laser Version
8/ 15
b). The laser parameter adjusting mode is shown in check box. After
selection, the laser becomes lit, the selection may be cancelled after setting laser intensity
and laser burning time, and the software automatically records the setting.
c). Drag led SVG format to change the size and location of SVG, or change the
drawing size by directly entering digit in the lower right of the graph.
e). While leading BMP file, the software automatically pop up SVG file change dialog
box, and according to adjustment parameter, change file to SVG format.
（
5
）
Function description of setting area
a). Single click button to open the setting interface as shown in the following
figure.