7
Antenna
Plug the antenna to the F-connector. To get good reception for DAB/FM
broadcasting, always extend the antenna with its full length.
First Time Setup
When powering the device on for the first time, first you need to set language.
Selecting the menu language
Rotate the knob to select the menu language you want from the list and press OK
button to confirm.
After language be chosen, it displays information of privacy policy. Press OK
button to continue. Then a setup wizard appears for helping you setup the main
use of the device.
Select “YES” and confirm your will launch the setup wizard.
If you select “NO”, the next window will ask you
choose if you want to start the
setup wizard again next time you power the device on.
Setup wizard helps you setup the main use of the device.
Setting date and time
-
Select “12” for 12
-
hour display format or “24” for 24
-hour
display format. If you select the 12-
hour format, the display shows “AM” in the
morning or “PM” in the afternoon after the time.
After this, the following options are available, to define if the time to be
synchronized from radios: Update from DAB, Update from FM, Update from
Network or No update
If you choose “Update from Network” you must indicate your time zone in the
next window.
Next choose “ON” for summer time, otherwise select “OFF”.
I
f you choose “No update”, you will have to enter the date and time manually.
“
AM”/ “PM” displays only if you have chosen the 12
-hour time format. Select
“AM” for the morning hours or “PM” for the afternoon hours.
Setting network -
Firstly the device asks if keep network connected. If you want
to control the device in all operating modes via the app, select “YES”. If choosing
“NO”, it is not possible to control the device from the app in the (Standby, AUX IN,
FM, DAB) operating modes. Note that the power consumption in standby mode
will be higher when the network connection is kept up.
Any WiFi networks found are listed on the display, along with their names.
After selecting the network, you will be asked for choose one of the following
methods of connection:
o Push button: The device prompts you to press the connect button on the
router. It then scans for a ready Push Button Connect network and connects.
