14
to-noise ratio (hiss) from weak stations. To change the scan settings to stop only
at stations with good signal strength, select Yes after choosing Strong station
only?
Audio settings
All stereo stations are reproduced in stereo. For weak stations, this may result in
a poor signal-to-noise ratio (hiss). To play weak stations in mono, select FM weak
reception: Listen in mono only and then YES.
CD Player
The smart radio can playback CD-DA (Compact Disc Digital Audio) format audio
CD-R/CD-
RW discs that have been finalised* upon completion of recording. It may
fail to play some CD-R/CD-RW discs due to poor recording and wide variation in
quality of the CD-R/CD-RW disc.
*Finalising enables a CD-R/CD-RW disc to playback on audio players. A disc which
has not been finalised may have information added to it using a computer but
may not always be playable.
Insert a disc with printed side facing up into the CD slot. The disc will be loaded
automatically. The unit will check the CD type and load its track list. The display
will show 'Loading' and then 'Reading' as the information is read.
Playback
Rotate the NAVIGATE knob or
/
on the remote control to play the
previous or next track, press and hold the button to rewind or fast forward.
Press NAVIGATE knob or
on the remote control to pause the track. Press it
again to resume.
Press
to stop the track.
To take out the CD, press
. Note that this device does not eject the CD if it is
not in CD mode.
Repeat/shuffle -
Press REPEAT/SHUFFLE on the remote control to swap among
normal playback, repeat one, repeat all and turn on/off the function of random.
CD track programming
- Stop the playback first if any track is playing.
Press FAV to program.
Set the first programming track, use
/
to seek the track. Press OK to
confirm and set the next programming track. Repeat the steps. When
programming is completed, press
.
Press OK to start playing the programmed track(s).
