7
Instructions Guide
DAB/DAB+ Radio
Press the ‘ON/OFF’ button (
Ref.10
). On first use, DAB radio will
automatically start scanning all stations and save them.
To auto scan (if the unit has not automatically done so, or shows
no signal), ensure that the radio is in DAB mode by using the
‘Mode/Key’ button (
Ref.6
). Follow this by
holding
the ‘Menu/
Info’ button (
Ref.7
) and the screen should then display “DAB
<FULL SCAN>”. Press Select/Preset (
Ref.2
) to confirm this.
The unit will then start scanning up the frequency band and
store all stations that have a good signal.
Please note:
ensure
that you are in an area with signal bars displaying.
The radio will automatically save all those stations that have a
strong signal. After searching has finished it will automatically
play the first station stored.
To listen to any of the stations that have been stored, use the
‘Next’ and ‘Prev’ buttons (
Ref.3/4
) to navigate through the
stations. Press ‘Select/Preset’ to make your station selection.
When you turn the radio on it will automatically tune to the
same station (DAB, FM and MP3) that was last selected.