Skip WPS
Enter key as for a standard encrypted network.
For more information on setting up a WPS encrypted network, see your WPS router’s instructions.
Completion
Homerton 2 attempts to connect to the selected network. It will show connected if the setup is successful. If
connecting fails, Homerton 2 returns to a previous screen to try again.
Press “OK” to quit the setup wizard.
Equaliser
Network Wizard
Enter to search AP SSID, then input the WEP / WPA key or choose Push Button/Pin/SkipWPS to connect to
the wireless network.
PBC Wlan Setup
Push Button Con guration, it is to connect the AP that supports WPS (Wi-Fi ProtectedSetup).
View Settings
View the information of current connected network: Active connection, MAC address, WLAN region, DHCP,
SSID, IP address, Subnet mask, Gateway address, Primary DNS andSecondary DNS.
Manual Settings
Choose wireless network connection and enable or disable DHCP (Dynamic HostCon guration Protocol).
Network Pro le
Homerton 2 remembers the last four wireless networks it has connected to, and automatically tries to
connect to whichever one of them it can nd. From here you can seethe list of registered networks. You can
delete unwanted networks by turning and pressing then choosing YES to con rm delete.
Keep Network Connected
f you choose to keep network connected, the WiFi will not disconnect even you are in standby mode.
Otherwise, the connection will only be available in Internet Radio and MusicPlayer modes. This option allows
Homerton 2 to be ready forDLNA streaming in any operating modes.When Keep network connected is
selected the standby power consumption is raised.
Time/date
Set the time manually or automatically update, time format, time zone and daylight.
Brightness
You may change the backlight of each environment (Normal or standby) to High, Medium High, Medium,
Medium Low, Low or Off.
Language
Change it as your preference.
Software update
From time to time, software upgrades may be created with bug xes and/or additional features. You can
either check manually or set Homerton 2 to check periodically automatically (this is the default). If newer
available software is detected, you will be asked if you want to go ahead with an update. If you agree, the new
software is then downloaded and installed. After a software upgrade, all user settings are maintained.
NOTE: Before starting a software upgrade, ensure that Homerton 2 is plugged into a stable main
ti
Di
ti
d i
d
tl d
th
it
