www.major-equipment.com
9
Adjusting the Rollers
• Slacken the Height adjuster stop lock nuts
B
and
• Adjust the roller adjuster
A
to obtain the desired cutting height.
• Tightly close the lock nut
B
again to keep the rollers in this position.
NOTE: IT IS IMPORTANT TO HAVE
ROLLERS LEVEL AFTER ADJUSTMENT.
B
A
Blade rotation
1400 Verge Major
2000 Verge Major
2650 Verge Major
Blades must always be timed at 90 degrees to each
other as shown in diagram above. Failure to do so
can cause the blades to foul and in turn may damage
the transmission.
Flow Restricor Tap
The speed of lowering and raising the machine is controlled by a Flow
Restrictor Tap which is located on the hydraulic hose connected to the Body
Ram. The adjustment should be carried out by a competent and quali
fi
ed
person.
In order to adjust the
fl
ow:
•
Slacken grub screw
A
,
•
Turn the knob
B
until desired speed lowering/raising is reached,
•
Lock the position of knob
B
by tightening grub screw
A
.
B
A
