www.major-equipment.com
16
C
A
B
C
C
D
A
B
Roller and Castor wheels adjustment
In order to achieve desired cutting height, castor wheels and roller should be adjusted.
Castor wheels (optional)
To adjust the height of front wheels lift up the
machine and:
1. Unscrew and remove Bolt
A
;
2. Slide down the Castor Yoke
B
and remove it;
3. Depending on the desired cutting height place
Spacers
C
above or below Castor Arm
D
.
4. When adjustment is complete, relocate Castor
Yoke
B
and secure it with Bolt
A
.
5. Repeat this procedure for the other wheel.
Roller
To adjust the height of the roller follow this procedure at both
sides of the roller:
1. Loosen Bolt
A
(Note: You do not have to remove the bolt,
half of the turn will suffice to allow movement);
2. Loosen Nut
B
and move the roller up/down to decrese/
increase the cutting height;
3. Match the height of the roller on both sides of the machine
by checking the position of Arrow
C
;
4. When adjustment is complete, re-tighten Bolts
A
and
B
.
