Calibration and Measurement
The gauge can calibrate Zero-point of
Fe
or
Non-Fe
, or
DELETE
wrong
calibrated zero-point of
Fe
or
Non-Fe
. It is recommended that the zero-point
be calibrated before use.
Zero-point Calibration of Fe or Non-Fe
•
Press and hold the
ZERO
button to Zero-point the calibration of the
Fe
or
Non-Fe
measuring mode
•
In the
Fe
mode, Zero-point calibration of
Fe
.
•
In the
Non-Fe
mode, Zero-point calibration of
Non-Fe
(Less than
50UM(µm) is effective).
Delete Fe or Non-Fe Zero-point
1. Press the
SELECT
button to enter the
MENU
2. Press the
UP/DOWN
button to
SELECT CALIBRATION
3. Press the
SELECT
button to
ENTER CALIBRATION
4. Press the
UP/DOWN
button to delete the
ZERO-POINT
of
Fe
or
Non-Fe
5. Press the
SELECT
button for
OK
6. Press the
BACK
button to
RETURN
Delete Functions
In MENU system, you can find following function
•
Delete current data:
in measurement interface, you can delete the last
data entry by pressing the
BACK
button.
•
Delete all data:
Enter menu-view; you can delete all current data and
statistics
•
Delete Group data:
Enter menu-view-group data; you can delete this
group data by pressing the
SELECT
button
Trouble Shooting
The following list of error messages explains how to identify and eliminate
faults.
Err1
Fe probe fault
Err2
Non-Fe probe fault
Err3
Both probes.
Err4
Fe probe fault
Err5
Non-Fe probe fault
