Select Working Mode
Working Mode:
•
There are 31 working modes in this gauge. Measurement data will not be
stored when the gauge is in Group0 measurement mode.
•
In the other 30 working modes, 30 measured data can be stored in each
mode cycle.
1. Press the
SELECT
button to enter the
MENU
2. Press the
UP/DOWN
button to select WORKING MODE
3. Press the
SELECT
button to enter WORKING MODE
4. Press the
UP/DOWN
button to select WORKING MODE
5. Press the
SELECT
button for
OK
.
Select Measure Mode (Probe)
The probe has 3 (three) different modes:
AUTO:
T
he probe can automatically select the working mode. When placed
on steel (magnetic substrates), it will work in magnetic induction
principle. When placed on no-ferrous metals, it will work in eddy
current principle.
Fe:
The probe works in magnetic induction principle.
No-Fe:
The probe works in eddy current principle.
1. Press the
SELECT
button to enter the
MENU
2. Press the
UP/DOWN
button to select WORKING MODE
3. Press the
SELECT
button to enter WORKING MODE
4. Press the
UP/DOWN
button to select WORKING MODE
5. Press the
SELECT
button for
OK
.
Settings
Select Unit
1. Press the
SELECT
button to enter the
MENU
2. Press the
UP/DOWN
button to
SELECT THE SETTING
3. Press the
SELECT
button to
ENTER THE SETTING
4. Press the
UP/DOWN
button to
SELECT UNIT
5. Press the
SELECT
button to
ENTER
6. Press the
UP/DOWN
button to
SELECT
7. Press the
SELECT
button for
OK
Backlight Brightness Setting
1. Press the
SELECT
button to enter the
MENU
2. Press the
UP/DOWN
button to
SELECT THE SETTING
3. Press the
SELECT
button to
ENTER THE SETTING
4. Press the
UP/DOWN
button to
SELECT BACKLIGHT
5. Press the
SELECT
button to
ENTER
6. Press the
UP/DOWN
button to adjust the brightness of the
BACKLIGHT
7. Press the
BACK
button to
RETURN
.
