Install the mortise lock posi-
tioning plate. The plate will
fit into the 1-1/4” x 8” face-
plate cut out. There will be
a 3/8” diameter pin
centered on the plate.
There is no top or
bottom to worry about.
Slide the HIT-66 template with the alignment
guide alignment pin and tighten to door.
Alternate tightening between the top and
bottom clamp. Do not attempt to tighten one
clamp all the way at once.
With a 3/8” twist drill,
drill the thru bolt
holes on both sides
of the door. These
holes go to the
mortise cavity. Drill
both top and bottom
holes on both sides
of the guide, do not
try to drill from one
side through to the
other.
PAGE 4
Copyright 2011—Major Manufacturing
