Majestic WT 247, Instruction Manual

Page: 15 / 24

P. 5
RAINY
STORMY
FROST ALERT
Frost Alert Icon appears when outdoor
temperature is below 0°C
AIR PRESSURE TENDENCY INDICATORS
When the arrow appears, the air pressure is increasing, the weather is expected to improve.
When the
arrow appears, the air pressure is decreasing, the weather is expected to become worse.
When the arrow appears, the air pressure change is stable.
Remarks: Moving your weather station from one floor of a building to another floor will affect the accuracy of
your weather station, which should operate at the same altitude all the time. If you move it to a new location, it
will take 24 hours to get stable and accurate again.
Our weather station provides next 12-24 hours weather forecast. It may not match with the current weather
condition outside.
TO DISPLAY AIR PRESSURE READOUT
Press and hold until the calendar display shows the air pressure readout in hPa. Press and hold
again to revert back to calendar display.
TO READ MAXIMUM-MINIMUM IN-OUT TEMPERATURES AND HUMIDITIES
Simply press the to view the maximum indoor-outdoor temperatures and humidities records with
“ MAX ” icons appearing on the display. Press again to view the minimum indoor-outdoor temperatures and
humidities and the air pressure with “ MIN ” icons appearing on the display.
When the maximums or minimums are displayed, press and hold the to reset both records and it will
start to record the maximums and minimums again.
IF YOU LOSE THE OUTDOOR TEMPERATURE AND HUMIDITY
When the outdoor temperature and humidity digits show '---", the wireless transmission is either interrupted or
lost. Press and hold the
 / CHANNEL button to start searching for the signal from the outdoor transmitter with
the flashing.
If you continue to lose the outdoor temperature and humidity display, which could happen in extreme cold
weather, try placing the transmitter in a different location until you have smooth transmission of temperature /
humidity data.
HOW TO SYNCHRONIZE YOUR WEATHER STATION WITH ANOTHER OUTDOOR
TRANSMITTER
1. Press  / CHANNEL at the back of your weather station, icon appears under your outdoor temperature
and humidity.
2. Press and hold

/ CHANNEL until the icon blinks, your weather station is searching for the signal of
another outdoor transmitter at Channel 2.