Majestic WT 247, Instruction Manual

Page: 12 / 24

P. 2
QUICK SETUP
Step 1:
Insert the AC/DC adaptor to any AC household outlet. Then insert the DC jack to the back case of your unit.
Step 2:
Keep your weather station and wireless outdoor transmitter next to each other. Slide open the battery cover at
the back of your wireless outdoor transmitter, then insert 2 x AAA alkaline batteries to the battery compartment.
Make sure the Channel selector is at 1 position. Replace the battery cover.
Make sure (Channel 1) is displayed under the outdoor temperature and humidity. You could press

/
CHANNEL to select Channel 1.
Your weather station will receive data signal from the outdoor transmitter in few seconds. Then place your
outdoor transmitter in a dry and shaded area.
Installing backup batteries to your unit
Your weather station requires 3 x AAA alkaline batteries to provide backup power to it in the event of a
temporary power interruption.
1. Place your unit face down on a flat surface.
2. Slide and remove the battery cover at the bottom of your unit.
3. Insert 3 x AAA alkaline batteries into the battery compartment by observing the “+” and “-“ polarity as
indicated.
4. Replace the battery cover.
If the AC main power is interrupted, the backlight will go off. The backup batteries will keep the time and all
settings of your unit. Press once to turn on the backlight for 5 seconds.
Remarks:
Keep in mind that your outdoor transmitter has a 30-meter open air transmission with no obstructions. Actual
transmission range will vary depending on what is in the path of the signal. Each obstruction (roof, walls, floors,
ceilings, thick trees, etc.) will effectively cut signal range in half.
Insert the holder to the bottom of the outdoor transmitter for desktop or insert it to the back of the transmitter for
wall mount purpose.
TO SET YOUR UNIT MANUALLY
The setting of your unit comes into the sequence of 12/24 hour, hours, minutes, year, month, date, month-
date/date-month display and snooze duration.
1. Press and hold for 2 seconds, time digits change to “ 24Hr “ and flash. Press

or

to select “1 2 Hr ”
time format. When 12Hr time format is selected, PM indicator will be displayed.