This section offers a general explanation of how properly to install the
SATPOS20D antenna. Installation of the SATPOS20D must be accomplished
by or under the supervision of an authorized dealer for the Limited Warranty
to be valid and in force. The steps in the installation and setup process are as
follows:
1. Preparing for the installation
2. Select location
■
Mount the antenna (ODU) on top of the vehicle
3. Equipment and cable installation
■
Install the Indoor Unit (IDU), Power Supply near the Satellite
Receiver and TV
■
Connect the cables
4. Initial power-up and system checkout
■
Select the satellite
2.1 Unpacking the SATPOS20D
The following items are included in the packaging of the SATPOS20D:
Be sure to verify the complete shipment of your system before
beginning the installation.
2 Installation
SATPOS20D
8
Item
Description
Quantity
1
Outdoor Antenna Assembly (ODU)
1 each
2
Digital Indoor Unit (IDU)
1 each
3
Power Cable
1 each
4
Coax Cable (10m)
1 each
5
Coax Cable (1m)
1 each
6
Installation & User Manual
1 set
2.1.1 Preparing the SATPOS20D Antenna for Installation
Upon opening the shipping container remove the items listed in the
table above
