4. Ensure that there are at least 3cm of space around both units
for ventilation and connection of cables.
Do not stack the units on top of each other.
5. The following describes the basic wiring configurations for the
SATPOS20D antenna system.
■
Connect the RF cable to the SATPOS20D port on the back of
the IDU
■
Connect one end of the supplied coax cable to the receiver
2.2.3 Initial power-up and system checkout
Once all of the system cables have been connected, and when the
Power Supply is connected to the IDU then the antenna will have power
applied and it should be ready to checkout the system.
The light indicators on the IDU have three different modes of operation.
■
When the POWER LED is lit, it indicates that the IDU is
turned on and tracking the satellite
■
The LNB indicator lights up when your decoder is powering
the LNB
■
When the antenna acquires the desired satellite, the LOCK
LED light is turned on
Figure 2-1
Majestic Global NZ Ltd.
10
Power can be turned off by pressing the POWER button as shown in Figure 2-2
Figure 2-2
