Notes:
- Use manual tuning to select weaker stations that might be
skipped during automatic tuning.
- If the automatic tuning does not stop on the exact frequency
of the station, for example, it stops on 88.9 MHz instead of
88.8 MHz, use the manual tuning method to “fine tune” to the
exact frequency of the desired station.
HINTS FOR BEST RECEPTION
To insure maximum FM tuner reception, unwrap and fully extend
the EXTERNAL FM WIRE ANTENNA for best FM radio reception.
TO SET/RECALL RADIO STATION PRESETS
1. Press the unit button (2) and (3) select the desired radio
station.
2. Press and hold the unit button (5) the next available preset
memory number will flash on the LED display. (Note: “P01”
will flash in the display if you are programming presets for the
first time.)
3. Press the unit button (2) and (3) to change to the desired
preset number P01 thru P10, press (5) button to save the
preset radio stations.
4. Repeat steps 1 through 3 to preset up to10 FM stations.
5. To recall one of the preset stations already programmed,
Press the unit button (5) repeatedly until you reach the
desired preset number/radio station.
SETTING THE ALARMS (AL1 and AL2)
You can select either a Beep Alarm or the FM Radio as the alarm
source. The setting sequence for Alarm is as follows:
SETTING THE ALARM 1 (BEEP)
Normal Time→ AL 1 Hour → AL 1 Min → AL 1 weekday Alarm →
AL 1 beep → Normal Time.
SETTING THE ALARM 1 (RADIO)
Normal Time → AL 1 Hour → AL 1 Minute → AL 1 weekday → AL
1 beep → AL 1 radio → AL 1 final radio volume → Normal Time.
