IMPORTANT:
Be sure that the battery is installed correctly. Wrong polarity may
damage the unit and void the warranty. For best performance and
longer operating time, we recommend the use of good quality
battery.
AC POWER CONNECTION
Plug the AC power cord into a household outlet AC source.
SETTING THE CALENDAR AND TIME
1. In standby mode, press and hold the Time set button (5) for
about 2 seconds to enter the calendar/time set mode.
2. The year indicator will flash on the LED DISPLAY for up to 30
seconds prompting for a new entry.
3. While the display is flashing, repeatedly tap the unit buttons
(2), (3) to adjust to the correct year. Press and hold the unit
(2), (3) button faster scanning backward or forward. Tap the
unit button (5) to confirm.
4. Repeat steps #2 to #3 to adjust the month, day, time format,
current hour and finally current minute in the same way.
Notes:
The display sequence in calendar / time set mode will be as
follows:
Year → Month → Date → 12/24 Hour Time Format → Real Time
Hour → Real Time Min → Normal Time
To check the year while current time is displayed, tap the unit
button (2) once. The LED DISPLAY will change to year display for
5 seconds and then revert to current time automatically.
To check the date while current time is displayed, tap the unit
button (2) twice. The LED DISPLAY will change to date display for
5 seconds and then revert to current time automatically.
Make sure the hour is set so that the PM indicator is displayed
correctly for afternoon/night times.
