19
Majestic • MERIDPLA36IN, MERIDPLA36IL, MERIDPLA42IN, MERIDPLA42IL Owner’s Manual • 2519-981 Rev. E • 1/19
**
MERIDPLA42IL (LP)
MERIDPLA36IN/IL (NG & LP)
*
*Bottom left
feature
**Bottom right
feature
***LP stamp
determines
gas type
MERIDPLA36IN/IL (NG & LP)
MERIDPLA42IN (NG)
MERIDPLA42IL (LP)
X
X
X
MERIDPLA42IN (NG)
*
**
LP
***
X
X
*
X
Burner Identification/Verification
The burner may be accessed for identification and veri
-
fication purposes. This task should be performed by a
qualified service technician. Only the log/grate assembly
and burner skirt need to be removed in order to identify
burner. See Figure 4.3 for burner identification chart.
Figure 4.3 Burner identification Examples
Optional Black Glass Refractory
Frequency:
Annually
By:
Qualified Service Technician
Tools needed:
Protective gloves, dust cloths, non-abra-
sive glass cleaner
CAUTION!
Handle fixed glass assembly with care.
Glass is breakable.
• Avoid striking, scratching or slamming glass
• Avoid abrasive cleaners
• DO NOT
clean glass while it is hot
•
Remove decorative front from fireplace and set aside
on work surface.
• Pull the four glass assembly latches out of the groove
on the glass frame. Remove glass assembly from the
appliance See Figure 4.1.
Note:
It may be necessary to remove logs in order to clean
and inspect the glass refractory. Reinstall logs using in-
structions included in appliance installation manual.
•
Clean black glass refractory with a non-abrasive
commercially available cleaner.
- Light deposits: Use a soft cloth with soap and water
- Heavy deposits: Use commercial fireplace glass
cleaner (consult with your dealer)
• Carefully set fixed glass assembly in place on fireplace.
Hold glass in place with one hand and secure glass
latches with the other hand.
• Replace the glass assembly on the appliance. Pull out
and latch the four glass assembly latches into the groove
on the glass frame.
• Reinstall decorative front.
