24
Majestic • MDVI30IN, MDVI35IN, MDVI30IL, MDVI35IL Installation Manual • 2205-980 Rev. H • 12/16
F. Ember Placement
WARNING! Risk of Explosion!
Follow ember placement
instructions in manual. Replace ember material annually.
Improperly placed embers interfere with proper burner op-
eration.
Ember material is shipped with this gas appliance. To place
the ember material:
• Embers CANNOT be placed directly over rear burner port
as indicated in Figure 11.3(A) or in pilot area as indicated
in Figure 11.3(B).
• Place dime-size pieces of Glowing Embers® just in front
of the port trail in areas noted in Figure 11.3(A), but not
on or in between those ports. Care should be taken so
that those ports are not covered.
• Embers may be placed on the ports in areas indicated
in Figure 11.3(D). These embers must be placed loosely
over the port holes, not pressed down on or into the
holes. Create a single layer, no more than 1/4 inch thick.
•
Failure to follow this procedure will likely cause lighting
and sooting problems.
• Save the remaining ember materials for use during
appliance servicing. The embers provided should be
enough for 3 to 5 applications.
Figure 11.3 Placement of Embers
E. Place the Lava Rock
Figure 11.2 Placement of Lava Rock
WARNING! Risk of Explosion!
Follow lava rock place-
ment instructions in manual.
DO NOT
place lava rock on
burner. Improperly placed lava rock interferes with proper
burner operation.
Lava rock is shipped with this gas appliance. To place
the lava rock:
• Lava rock CANNOT be placed on the burner.
• Place lava rock in front of and to the sides of the
burner.
PLACE LAVA ROCK IN SHADED AREA ONLY
EMBERS NOT
ALLOWED IN
PILOT AREA
EMBERS NOT ALLOWED ON OR
AROUND REAR BURNER PORTS
EMBERS PLACED ON PORTS
EMBERS PLACED IN FRONT OF PORTS
EMBERS PLACED IN FRONT OF PORTS
D
A
B
C
C
D
EMBERS PLACED ON PORTS
