53D0419
Designer Series Gas Fireplaces
11
oPTIoNaL ToP VENT INSTaLLaTIoN
oPTIoNaL ToP VENT aPPLICaTIoN
The appliance is shipped as a rear vent unit. If the installa-
tion layout requires the unit to be a top vent configuration
the appliance can be converted by following the steps
below.
When removing and refitting the plates and adapter be
sure the associated gaskets are undamaged and refitted
as required.
1. Remove the eight (8) screws securing the flue pipe
adapter to the fireplace body.
Figure 9
w
a
RNING
after conversion to top vent configuration
the 4" (102 mm) flue pipe should be
concentric within the 6
B\,
" (175 mm) outer
collar (within 1/4").
FP1993
replace flue pipe
Screws
Flue Pipe
FP1991
remove screws
Screws
Flue Pipe
Adapter
Flue Pipe
Adapter
FP1991
Figure 10 -
Remove 16 Screws from Flue Pipe
Adapter and Flue Pipe Cover
FP1992
remove flue pipe
Screws
Flue Pipe
FP199
Figure 11 -
Remove Flue Pipe
Flue Pipe
Cover
FP1993
Figure 12 -
Attach Flue Pipe to Top Vent Coln-
figuration
. Set the flue pipe adapter aside, complete with the
gasket. Do not damage the gaskets as the adapter and
gasket must be refitted.
3. Remove the eight (8) screws securing the flue pipe cover
to the top of the intake box and remove the cover and
gasket.
Figure 10
4. Remove eight (8) screws securing the flue pipe to the
back of the intake box and remove the pipe and gasket.
Figure 11
5. Replace flue pipe to top of firebox. Ensure the gasket is
in place and undamaged. Secure with eight (8) screws.
Figure 12
6. Place the flue pipe cover and gasket removed in step
3 over the flue opening in bottom of the intake box.
7. Refit the flue pipe adapter and gasket to the top of fire-
place. Secure the adapter with eight (8) screws removed
in step 1.
