The Majestic Shower Company Limited
One North Place, Edinburgh Way, Harlow Essex
CM20 2SL England,
Tel44 (0) 8448 001 500
Fac44 (0) 1279 635 074
[email protected] www.majesticshowers.com
Door Panel
Fixed Panel
90°
90°
Hinge
packer
Hinge
packer
29
Insert a rubber strip into horizontal inline profile B. Use the
suction glass lifters to carefully lift the glass inline panel into its
profile. Align the end of the glass inline panel with the end of the
glass return panel, top and bottom; pack it up with rubber strips
if necessary, taking note of their positions. Check the panel sits
plumb vertical.
2
Door Panel
Fixed Panel
90°
90°
Hinge
packer
Hinge
packer
30
Using the suction glass lifters, remove glass inline panel B. Un-
tape and remove the horizontal inline profile.
31
Run a bead of silicone along the underside of the horizontal
inline profile, and reposition it on the floor where marked; tape
in place. Use the 10mm spacer to ensure it is aligned with the
horizontal return profile and push the mitred ends together.
Remove the 10mm spacer and apply a small amount of silicone
into the joint. Reinsert the noted rubber strips into the
horizontal inline profile.
Door Panel
Fixed Panel
90°
90°
Hinge
packer
32
Run beads of silicone along the inside of the horizontal inline
profile, as shown.
