Cadiz Installation Guide - Surface Profiles
– v2022
16
The Majestic Shower Company Limited
17 Flitch Industrial Estate, Chelmsford Road, Dunmow, CM6 1XJ
Tel44 (0) 8448 001 500
Fac44 (0) 1279 635 074 [email protected] www.majesticshowers.com
25
Cut the horizontal seal to the width of the door for fitting to the bottom edge of the door with
the deflector blade facing inwards.
On the handle side of the door, notch the deflector blade and side wall of the seal, as shown
in the top illustration, to clear the vertical seal on the Return panel.
26
Push the underframe insert into the underframe channel under the door noting
the difference in orientation for outward and inward opening doors.
The vertical blade of the insert should be notched at each end as shown to allow
any water to drain back from the underframe to the inside of the shower
enclosure.
Handle side of door viewed from inside of door
OUTWARD
OPENING
DOOR
INWARD
OPENING
DOOR
5-6mm
Notch
