- 29 -
ENGLISH
ENGLISH
FM Radio
Caution:
Before listening to the radio, please check that the FM antenna is correctly
connected and adjusted for length and direction.
Tuning in a Station
1. Repeatedly rotate the
SOURCE
button on the front of unit TUNER is displayed on the
display screen, or press the
SOURCE
button on the remote control.
2. Tune in a station using one of the following methods.
Auto Tuning
If you press and hold the
PROG
button on the remote control, display will show “AUTO”
and the auto tuning would start.
Manual Tuning
Repeatedly press the
H
/
G
buttons on the front panel of unit or press the / but-
tons on the remote control change the frequency until you find the station you want.
Preset Tuning (Available only after the stations are preset)
Repeatedly press the
H
/
G
buttons on the remote control or press the / buttons
on the front panel of unit to select the desired preset number. Its band and frequency
are displayed on the Display panel.
Presetting Stations
You can manually preset up 20 FM stations.
Tune in the desired station:
1. Press the
PROG
button on the remote control, the preset number will be displayed.
2. Press the / buttons on the remote control or press the
H
/
G
buttons on the front
panel of unit to select the preset number.
3. Press the
PROG
button again to store the station. The display will return to the
broadcast frequency display.
4. Repeat above steps 1 to 3 for each station you want to store in memory with a preset
number.
Note:
If the system is unplugged or if a power failure occurs, the preset stations will not
be erased after stored.
To change the FM Reception Mode
Press the Repeat button to select the Stereo or Mono channel to receive the best FM
reception mode.
