- 27 -
ENGLISH
ENGLISH
Power-saving automatic standby
As a power-saving feature, the system will automatically switch to Standby mode if you do
not press any buttons within 15 minutes after playback is stopped (except for the Bluetooth is
connected.)
Setting the Clock
Setting the Clock Manually
1. Set the unit in standby mode.
2. Press and hold the
CLOCK
button, the VFD will display CLOCK SET and CLOCK 24
begins to blink.
3. Press the VOL+/- button on the remote control on the front panel of unit to select 12/24
mode (time format), the hour digits begin to blink, press the Clock button to confirm.
4. Press the VOL+/- button on the remote control or on the front panel of unit to set the
hour, press the Clock button to confirm.
5. Set the minute with the VOL+/- button on the remote control or on the front panel of
unit
6. Press the Clock button, the built-in clock starts operating.
Note:
• If the clock setting is idle for more than 90 seconds, the clock setting mode will be
cancelled.
• If a power failure occurs or the unit is disconnected from the mains socket, the clock
setting will be lost.
Setting the Clock Automatically
When the RDS station displays the time, press and hold the “INFO” button on the remote
control, and the clock will automatically synchronise time with the RDS station.
Display the Clock
In ECO power mode, press the Clock button.