38
20304734
40ICFDV Gas Fireplace Insert
Make sure the master switch on the command center is
in the “OFF” position. Wait at least five (5) minutes before
starting maintenance. Refer to Operating Instructions on
Page 26.
VeNTING SySTeM
A qualified agency should examine the venting system
annually.
CLeANING GLASS
Clean the ceramic glass periodically. Condensation will
sometimes form on the glass during a cold startup. This is
normal for all gas fireplaces and inserts. This condensation
often attracts dust and lint to the surface of the glass. The
initial paint curing of the appliance can also leave a slight
film on the glass. This is a temporary problem.
CLeANING and MAINTeNANCe
Figure 52 -
Typical Burner Flame
Figure 53 -
Typical Pilot Flame
FP2568
pilot flame
Sensor
Thermopile
FP2568
You should clean the glass after the first two weeks of use.
After that, you should clean the glass no more than two or
three times a season. Use a mild glass cleaner to clean
the door. Do not use abrasive cleaners. They will damage
the glass surface.
PILOT AND BuRNeR FLAMeS
Visually check pilot and burner flames periodically.
Refer
to Figure 52
for typical burner flame.
Refer to Figure 53
for typical pilot flame.
LG1150
40ICFDV log flames
LG1150
