17
18NB/24NB Gas Log Set
81D0108
LG621
place log 2
LOG PLACEMENT
•
Use only rock wool provided with log
set.
•
Do not add additional rock wool
.
W
ARNING
FP2269
place rock wool
Dime-sized Pieces
of Rock Wool
FP2269
Figure 19 -
Place Rock Wool
INSTALL 18", 24" AND 30" (F,R) HIGHLAND
OAk LOGS ON NATURAL BLAZE BURNER
1. Place the #1 log (the “chunk”) on the grate bar right side
of the burner adjacent to the controls.
Figure 20
2. Place front right log (#2) on right pin located on burner
and right grate bar.
Figure 21.
After placing front right
log, ensure log is fully upright and tilting towards the
back of the burner.
Figure 20
LG620
place log 1
Ember Chunk
Log #1
LG620
Figure 21
Right Front
Log #2
LG621
3. Place right rear log (#3) on pin located
on rear support bracket and rest left side
of log on front right log.
Figure 22.
After
ROCk WOOL PLACEMENT
Before installing logs, place rockwool in dime size pieces
evenly over small burner ports starting in the rear of the
burner going towards the front. Avoid placing rock wool on
slots on each side of rear burner and on large yellow flame
ports on front of burner. After covering small burner ports,
discard any excess rock wool.
Wash hands after placing rock wool. Itching may occur.
NOTE: Installation instructions are the same for 18",
24", and 30" log sets. Pictures used in this manual
illustrate the 24" set. Some variation may exist between
the images and the set included with this manual.
