manualshive.com logo in svg

Majacraft M WH ROSE, Instruction Manual

The Majacraft M WH ROSE is a top-of-the-line spinning wheel, designed for experienced fiber artists. To help you fully utilize its features, we provide a comprehensive Instruction Manual that you can easily download for free from our website. Get the most out of your spinning experience with our detailed manual at manualshive.com.

Share
Download
background image

8

majacraft

The drive wheel has been predrilled with the holes for the aluminium crank assembly. You will need a 

posi-drive screwdriver and the three 32mm silver screws. Make sure the drive belt is on.

8.  Drive Band

Required:

1 - Green drive band 

(in the hardware bag)

The green drive band goes on the grooves on the drive wheel and 

then through one of the grooves on the pulley. It is important that 

the drive belt is reasonably tight otherwise the treadling will feel 

heavy.

Required:

3 - Silver 32mm (1 1/4”) screws 

(in the hardware bag)

Posidrive screwdriver

9.  Crank Assembly

7d

8a

8b

9a

Summary of Contents for M WH ROSE













Reviews:

No comments

Related manuals for M WH ROSE

Brands by name

Popular brands

Load more brands