manualshive.com logo in svg

Majacraft M WH ROSE, Instruction Manual

The Majacraft M WH ROSE is a top-of-the-line spinning wheel, designed for experienced fiber artists. To help you fully utilize its features, we provide a comprehensive Instruction Manual that you can easily download for free from our website. Get the most out of your spinning experience with our detailed manual at manualshive.com.

Share
Download
background image

11

majacraft

Your Majacraft Rose is now assembled and you are ready to start on a new spinning adventure! From 

the team at Majacraft, we wish you great spinning in the future.

At this point, we recommend that you polish your 

Rose using Majacraft Lavender Polish or alternatively 

a standard wood polish. While not essential, it will 

help keep your Rose looking excellent into the future.

12.  Polish

At this point screw the flyer on to the flyer shaft. It may help to 

hold the whorl with your left hand and tighten the flyer with your 

right (assuming you are right handed). It may also be treadled on 

by holding the flyer in one hand and treadling the wheel in an 

anticlockwise direction.

Note

12a

11c

The images contained in this instruction manual are a guide only. There may be slight differences 

between these and your Rose.

Summary of Contents for M WH ROSE













Reviews:

No comments

Related manuals for M WH ROSE

Brands by name

Popular brands

Load more brands