MyPower S4220 & S4320 Series Switch Installa
tion Manual V1.0
Maipu Confidential & Proprietary Information
Page 46 of 80
6
Router Maintenance
6.1
Change Interface Daughter Card
The interface daughter card of the MP2900 series router does not support the hot
plugging.
The interface daughter card of the MP2900 series router if the RM2B card.
Step 1:
Power off the router.
Step 2:
Use a Phillips screwdriver to loosen the captive screws of the interface daughter
card
.
Use two hands to hold the captive screws of the interface daughter card
and pull out it to enable the interface daughter card to separate from the inbuilt
connector of the router.
F
IGURE
6- 1
L
O O SEN TH E CA P TIV E SCR EW
Step 3:
Pull out the interface card along the slot guide smoothly
