MyPower S4220 & S4320 Series Switch Installa
tion Manual V1.0
Maipu Confidential & Proprietary Information
Page 33 of 80
F
IGURE
4- 2
C
O NN EC T T HE RO U TER A N D
PC
V IA T HE
C
O NSO L E P O RT
When the PC (or laptop) is connected with the router via the configuration cable, first
connect the DB-9 side of the configuration cable to the serial interface of the PC and then
connect the RJ-45 connector of the configuration cable to the Console port of the router.
When removing the configuration cable that connects the PC (or laptop) with the router,
first remove the RJ-45 connector of the configuration cable, and then remove the DB-9
side of the configuration cable.
4.1.2
Set PC HyperTerminal Parameters
The following takes running Windows XP HyperTerminal on the PC (or laptop) as an example to
describe the setting of the serial interface parameters of the PC (or laptop).
Step 1:
Enable the PC (or laptop), select
Start
>
All Programs
>
Accessories
>
Communication
>
HyperTerminal
, and click
to set up the new connection
and display the interface of
Connection Description
as shown in Figure 4-3.
