IT
11
2.
Assembly instructions
2.1.
General safety instructions
-
Wear an equipment suitable to the operations to be performed, avoiding garments and accessories
that hamper the various operations or is likely to become entangled in the machine.
-
Do not remove safety devices or protection.
-
Any technical changes that may affect the operation or safety of Maior Levante must be carried out
only by technical personnel of the manufacturer or formally authorized by the same technicians. Do
not disassemble or special Maior Levante groups unless expressly authorized.
-
Make sure that the base to which will be attached to the machine is adequate to support the weight
of the complete assembled machine Tv and any accessories, which at the limit of the data sheet can
weigh 75Kg. Otherwise, the column could go into overload, up to deteriorate
and break. This could
also compromise the correct return of the cover panel in its seat, with its possible damage.
2.2.
Installation
The installation of Maior Levante is closely linked to the work of the artisan who will carry out the cabinet
that contains the machine. The cabinet can be thought to be dedicated to only one slot of the TV as well as
provided with doors, drawers, shelves.
2.2.1.
Instructions and tips for creating mobile
For the furniture planning no special specifications. Follow these guidelines, however, will allow optimal
performance:
-
Define the final height of the cabinet according to the technical specifications of the machine.
Consider that the machine has a minimum height of 842.5 mm, and that the column can develop
maximum of 999 mm riser.
-
If the mobile provides drawers, doors, shelves, it is appropriate that the compartment in which the
machine is physically isolated from the other sections of the cabinet is installed.
In order to safeguard the integrity of the machine and the TV, make sure that the space dedicated to
the machine invades any object accidentally.
-
It is advisable to make provision for a removable backrest to ensure the space necessary for an
optimal installation.
-
In the embodiment of the seat of the cover panel to make sure that it is not weakened the structure
of the cabinet and in particular its upper floor.
In the case of a very close installation to one of the movable end, consider to reinforce the
weakened portions of the floor taking care not to invade in any way the field of action of the
machine and taking into consideration all dimensions (eg.
Ornamental wings ⑦)