B Operating Instructions for Rotary Joints Series DX/DXS
8
.
Maintenance
25/27
© 2011 by Christian Maier GmbH & Co. KG Maschinenfabrik
This document may not be copied or disclosed to third parties.
All rights, including copyright and property rights, reserved by Maier.
AB-DX_en – Version 08 – 01.03.2011
B
8.2.2.2
Dismounting the rotary joint
Prerequisite
The rotary joint must have been dismounted from the roller.
INFORMATION
The design of the rotary joints is shown in the section "Specifications and Spare Parts".
Rotary joint with one-piece housing
B-29
1.
Remove circlip [L] in the housing of the rotary joint.
2.
Remove the rotor [M1] with the bearing from the
housing.
Rotary joint with housing consisting of several pieces
B-30
1.
Remove the screw connections [S1 + S2].
2.
Remove the housing parts [M1 + M2].
3.
Dismount the counter ring [M3] from the rotor.
4.
Remove the circlip [L] and the Nilos ring [N] from the
bearing housing.
5.
Dismount the bearing housing [M4].
6.
Dismount all parts, in particular the installed seals
and bearings.
M1
L
S1
S2
L
N
M1
M2
M3
M4
