Maier DX Series, Operating Instructions Manual

Page: 27 / 47

B Operating Instructions for Rotary Joints Series DX/DXS
8
.
Maintenance
23/27
© 2011 by Christian Maier GmbH & Co. KG Maschinenfabrik
This document may not be copied or disclosed to third parties.
All rights, including copyright and property rights, reserved by Maier. AB-DX_en – Version 08 – 01.03.2011
B
8. Maintenance
INFORMATION
Maier offers on site service by our experts and training of your service staff.

Observe the safety instructions in chapter 3.

Maintenance may only be performed by authorized staff as per chapter 3.4.

Work on the rotary joint may only performed when the machine/system is at a
standstill and after the rotary joint has cooled down.

Always wear safety glasses when performing work on the rotary joint to protect
against escaping fluid.

Use only genuine spare parts.

If you have removed protective equipment, refit such equipment after having finished
your work and verify proper operation of such equipment.

All screws must be tightened with the specified tightening torque (refer to section
"Specifications and Spare Parts").
8.1 Maintenance plan
Interval Activity Explanation
Refer to section
"Specifications and
Spare Parts"

Relubricate the rolling
bearings if a lubricating
nipple is installed
Refer to the section "Specifica-
tions and Spare Parts" for the
lubricant quantity
Every 12 months

Check bearings

Check seals
Repair can be performed by
Maier customer service.
8.2 Repair
8.2.1 Tools

Suitable lifting gear must be used to mount the rotary joint to the roller.

A torque wrench must be used for tightening screws with a specified tightening tor-
que.