INSTRUCTION MANUAL FOR DISHWASHERS
Page 12 of 12
UK
7.1
Number of cycles to regenerate resins
The number of cycles between one resin regeneration and the next depends on the hardness of the
local water, and should be set in accordance with the table shown. Set the parameter
dH
in the settings
menu as described in the paragraph:
dH
°F
No.
Cycles
dH
°F
No.
Cycles
dH
°F
No.
Cycles
dH
°F
No.
Cycles
6
10
160
10
18
120
14
25
80
18
32
40
7
12
150
11
20
110
15
27
70
19
34
30
8
14
140
12
21
100
16
29
60
9
16
130
13
23
90
17
30
50
N.B.
each unit on the display corresponds to 10 cycles.
Chap 8
SCRAPPING
Our machines do not contain materials requiring special handling.
(Applicable in the EU and countries with sorted waste disposal)
The mark applied to the product or its documentation indicates that it must not be
scrapped with domestic waste when it reaches the end of its service life. To prevent
damage to the environment or health risks due to improper scrapping, keep this product
separate from other waste and recycle it so as to promote sustainable use of materials.
Domestic users are requested to contact their reseller or local authority for information on sorted waste
disposal and recycling for this type of product.
Corporate users are requested to contact their supplier and check the terms and conditions of the
purchase contract.
The product may not be scrapped together with other commercial waste.
Chap 9
ENVIRONMENT
RESPECT FOR THE ENVIRONMENT
Proper use of the dishwasher can improve its environmental footprint, if the following simple rules are
observed:
Only wash full baskets.
Switch the dishwasher off when not using it.
Keep the machine closed when it is in standby.
Use wash programmes suited to the amount of soiling.
Supply the machine with hot water, if gas heated.
Make sure the drains flow into a suitable sewer.
Do not exceed the recommended dose of detergent.
The manufacturer reserves the right to modify the electrical, technical and aesthetic features of this
appliance and replace any of its parts without notice, as he deems necessary to offer a reliable
product with a long service life and advanced technology.
