background image

INSTRUCTION MANUAL FOR DISHWASHERS

 

Page 4 of 12

 

 

GB 

 

 

 

Free drain 

2.5

 

Connection to the drain line 

 

The drain line must be made up of a free water 
trap

 of a size proportionate to the delivery of the 

drain pipe supplied with the machine. The pipe must 
be able to reach the water trap 

without being 

pulled, squeezed, bent, crushed, pressed or 
forced by anything

.

 

 

The tank empties by gravity, so the drain must be at 

lower level than the base machine

.

 

Max. 

1 m 

 

 

With discharge pump (available on 

request) 

  If the drain is not at a lower level than the base of the 

machine, you can use the version equipped with a 
discharge pump (available on request). 

  In this case the maximum drain height is 1 m. 

  Always check that the drain works properly and that it 

is not clogged. 

  All other solutions must be previously agreed upon 

and approved by the manufacturer. 

Chap 3

 

RISKS AND IMPORTANT WARNINGS 

  This appliance is to be used only for the use for which it was expressly designed. All other uses 

are to be considered unfit and therefore dangerous. 

 

 

The specialised personnel who will install the machine is obliged to appropriately instruct 
the user on the appliance’s operation and any safety measures that are to be complied 
with, also by providing practical demonstrations. 

 

  Any type of service done on the machine, also in the case of failure, must be performed only by 

the manufacturer or by an authorised service centre and by qualified personnel, 

using only 

original spare parts

  Always disconnect or separate the machine from the electric and water networks before 

performing maintenance, repairs or cleaning. 

 

  Untrained personnel must 

NOT

 use the machine. 

  The machine must 

NOT

 remain live when it is not used. 

 

 

NEVER

 open the machine door quickly if it has not finished the cycle. 

 

NEVER

 use the machine without the factory-installed safety attachments. 

 

NEVER

 use the machine for washing object of a type, shape, size or material not guaranteed for 

machine washing or not perfectly intact. 

 

NEVER

 use the appliance or its parts as a ladder or support for people, things or animals. 

 

NEVER

 overload the open door of front-loading machines, which are sized to support only the 

rack loaded with kitchenware. 

 

NEVER

 immerse bare hands in the washing solutions. 

 

NEVER

 turn the machine over after installation. 

Summary of Contents for AMIKA 50XL














Reviews: