Mahr MarSurf PS1, Operating Instructions Manual, Page: 19 / 20

5
Mahr GmbH, MarSurf PS1
3.3 Making Instrument Settings
The basic setting
– standard
and the measuring conditions
– traversing length
– number of sampling lengths
(as per ISO, JIS, ANSI/ASME)
– Ls filter (as per ISO, JIS, ANSI/ASME)
must be changed before a measurement.
All further settings can be changed before or af­
ter the measurement.
i
Instrument settings can only be modified
if they are not blocked, i.e. if
– "
Blocking off
" is set in the
"
Basic settings
" subcatalog
(see Section 3.3.1)
– and "
Save off
" or "
Save
interrupt
" (see Section 4.6) is
set in the "
Results
" subcatalog.
To modify instrument settings:
1. Hold down one of the green Start keys and
press the Lt/Lc key.
The catalog of instrument settings opens
and the first subcatalog "
Measuring con­
ditions
" appears.
2. Select the required subcatalog (e.g. "
Basic
settings
") using or .
3. Open the subcatalog with .
The first line (e.g. "
Language
") is dis­
played.
4. Select the required line (e.g. "
Timeout
")
with or .
5. To change the value, press and select the
required value (e.g. "
on
") with or .
6. Confirm the change with .
8
Press again to close the subcatalog; press
again to close the catalog.
i
To retain modified instrument settings
after the MarSurf PS1 is switched off, an
error­free measurement must be carried
out with these settings.
8
Pressing cancels the selection and the change is not
made.