background image

|

L A D E N M Ü H L E N

S H O P   G R I N D E R S

1. Safety

Please read and observe the following operating in-
structions carefully. Non-observance can result in 
damage to the grinder as well as in health-threaten-
ing risks for the user.

1.1 Symbols

The following two symbols are used in this manual of operating instruc-
tions:

Safety instruction:

In case of non-observance, extreme risk of accidents 
exists.

General instruction:

In case of non-observance, the grinder can become 
damaged or optimum operation not be guaranteed.

1.2 Safety Instructions

Never use the grinding mechanism to grind other products or objects 
than coffee beans. Ground material is never allowed to be fi lled into the 
hopper. 

Do not carry out any modifi cations or changes on the grinder. In case of 
non-observance, the manufacturer shall be liable for resulting damage 
in no case whatsoever.

Never operate the grinder in moist or, even worse, in wet surroundings. 

Never put your fi ngers or objects into the rotating grinding mechanism 
underneath the hopper. 

Always pull the power supply plug out of the outlet before carrying out 
any maintenance or cleaning work on the grinder. Never start the grind-
er with a defective power supply cable. 

Check the grinder regularly for any signs of damage on the power supply 
cable, plug, fi nger protector, etc. Any repairs that may be required are 
only allowed to be carried out by experts. Please contact an authorized 
customer service centre, your local dealer or us directly as the manufac-
turer. 

Do not exceed the permissible maximum operating period of 40 min-
utes. Afterwards, allow the motor to cool down for approx. 30– 40 min-
utes.

When unpacking the grinder, please check to determine whether the 
power supply voltage (volts) corresponds to the grinder voltage on the 
rating plate.

Children do not recognize the risks that may arise when handling electri-
cal grinders; therefore never leave children alone with electrical devices 
without proper supervision.

Never immerse the grinder in water and do not oper-
ate it with wet hands.

4

Summary of Contents for VTA6S FC

















Reviews: