background image

Always remove the electrical plug from the outlet prior to con-
ducting maintenance or cleaning work on the grinder. Also, prior 
to removing the hopper, the plug must be removed from the elec-
trical outlet.

Never operate a grinder with a damaged electrical cord. Inspect 
the grinder regularly for damages of the electrical cord, plug, etc.

Any required repairs may only be conducted by authorized service 
personnel. For this reason, please contact a customer service re-
pair facility, your dealer or us directly as the manufacturer.

Do not exceed the maximum allowable repetition frequency:

• @ 50Hz

: 4 sec. ON 16 sec. OFF

• @ 60Hz

: 4 sec. ON 40 sec. OFF

Do not make any modifi cations or alterations to the grinder. The 
manufacturer assumes 

absolutely no liability

 for damages oc-

curring from failure to observe these instructions.

Children cannot appreciate the dangers that can exist in the op-
eration of electrical grinders. For this reason, never leave children 
unsupervised with electronic appliances such as this grinder.

Never submerge the grinder in water and never 
operate with wet hands.

1. Safety

Please read carefully and observe the following 
safety instructions. Failure to do so can result in 
damage to the grinder and danger to the user.

1.1 Symbols

The following two symbols are used in these operating instruc-
tions:

Safety Instruction:

Imminent accident danger if you fail to observe.

General Instruction:

Failure to observe can result in damage to the 
grinder and optimum operation cannot be guar-
anteed.

1.2 Safety Instructions

Only whole roasted coffee beans may be ground in the K60 ES.

When unpacking please inspect whether the power supply (volt-
age) complies with the grinder voltage on the manufacturer’s 
name plate on the bottom of the grinder. Never operate the 
grinder in damp or wet surroundings.

H O R E C A    

|

    G A S T R O   G R I N D E R

Summary of Contents for K60 ES


















Reviews: