|
L A D E N M Ü H L E N
S H O P G R I N D E R
7. Operating Faults
Defect
The grinder
hums but does
not grind.
Cause
The spout is
clogged.
Grinding is set
too fine.
A foreign object
is in the grinding
mechanism.
Remedy
Set grinding fineness to
„coarse“ and start the grind-
ing process. The grinder will
then grind itself free. After-
wards, return the setting to
the desired grinding fine-
ness.
Turn the grinding fine-
ness setting to the right,
to „coarse“, and trigger the
grinding process. The grinder
will then grind itself free. Af-
terwards, return the setting
to the desired grinding fine-
ness.
Clean the grinding mecha-
nism as described and re-
move the foreign object. Ob-
serve the safety instructions!
Defect
The grinder does
not start.
Cause
The power sup-
ply plug is not
inserted.
The overload cir-
cuit breaker has
been tripped.
The pre-fuse was
tripped.
Remedy
Insert the plug into the out-
let.
Check whether the reset but-
ton of the circuit breaker has
jumped out. Press the reset
button in again if appropri-
ate. In case of repeated trip-
ping of the circuit breaker,
contact your authorised
customer service centre or
dealer.
Check the pre-fuse. Restore
the pre-fuse to its initial
state or replace it. Determine
whether other consuming
devices are also connected to
this fuse.
Seite 9
