L A D E N M Ü H L E N | S H O P G R I N D E R
Never operate the grinder in moist or, even worse, in wet sur-
roundings.
Never put your fi ngers or objects into the rotating grinding mech-
anism underneath the hopper.
Always pull the power supply plug out of the outlet before carry-
ing out any maintenance or cleaning work on the device.
Never put the device into service with a defective power supply
cable. Check the device regularly for any signs of damage on the
power supply cable, plug, fi nger protector, etc.
Any repairs that may be required are only allowed to be carried
out by experts. Please contact an authorised customer service
centre, your local dealer or us directly as the manufacturer.
Do not exceed the permissible maximum operating period of 40
minutes. Afterwards, allow the motor to cool down for approx.
30–40 minutes.
When unpacking the device, please check to determine whether
the power supply voltage (volts) corresponds to the device volt-
age on the rating plate.
Children do not recognise the risks that may arise when handling
electrical devices; therefore never leave children alone with elec-
trical devices without proper supervision.
1. Safety
Please read and observe the following operat-
ing instructions carefully. Non-observance can
result in damage to the device as well as in
health-threatening risks for the user.
1.1 Symbols
The following two symbols are used in this manual of operating
instructions:
Safety instruction:
In case of non-observance, extreme risk of acci-
dents exists.
General instruction:
In case of non-observance, the device can be-
come damaged or optimum operation not be
guaranteed.
1.2 Safety Instructions
Never use the grinding mechanism to grind other products or ob-
jects. Ground material is never allowed to be fi lled into the hop-
per.
Do not carry out any modifi cations or changes on the grinder. In
case of non-observance, the manufacturer shall be liable for re-
sulting damage in no case whatsoever.
4
